recombination at surface是什么意思

网络释义

用法例句

These samples were also characterized by XPS, XRD, TEM testing techniques on crystalline type, particle size, surface binding state.

采用溶胶-凝胶法合成锐钛型纳米TiO2胶体,用水热处理和常压下直接烧结等不同后处理方法制备TiO2晶粒,并使用X射线光电子能谱(XPS)、X射线衍射(XRD)、透射电子显微镜(TEM)三种测试手段对纳米TiO2的晶型、粒度与表面结合态进行表征,研究了后处理方法对纳米TiO2物理特性的影响,指出不同的后处理方法将有不同结晶性和粒度的TiO2,且TiO2表面含有的羟基量也有所差别。

The anatase nanometer-size TiO2 is prepared by sol-gel method first and then the influence of post-treatment method on crystalline type, particle size and surface binding state of nanometer-size TiO2 are studied .

采用溶胶-凝胶法制备锐钛型纳米TiO2,研究了后处理方法(水热处理和常压下直接烧结等)对纳米TiO2晶型、粒度与表面结合态的影响。

The reduction efficiency of nitrobenzene in surface bound Fe(Ⅱ) system followed the sequence of magnetite,hematite and steel converter slag from high to low.

研究了针铁矿、赤铁矿、磁铁矿和钢渣4种铁氧化物表面结合铁系统对硝基苯的还原转化,并对不同pH值下的还原机制进行了分析。

This paper introduces some key technologies in the field of manufacture about reverse engineering,such as technology of profile modeling,figuration manufacture and surface reproduction.

说明和分析了反求工程在制造领域中的几个关键技术:仿形测量技术、成形制造技术和表面再现技术。

The Study for Quantitative Analysis of Water Absorbed on Clays and Their Hydration Mechanism;

粘土表面结合水定量分析及水合机制研究

Research for surface morphology and water repellency of Lotus leaf;

荷叶表面的二元复合结构及其疏水性

Preparation of the Porous Structure on the Surface of Ti-25Nb-2Zr Alloy

Ti-25Nb-2Zr合金表面微孔结构的构建

Microstructure of Surface Recrystallization of Single Crystal Superalloy DD6

单晶高温合金DD6表面再结晶组织

Effect of Titanium Surface Oxidation on the Bonding Strength of Ti-Porcelain

钛表面的氧化对钛瓷结合强度的影响

Surface Structure of Epoxy Resin Blended with PCL-b-PDMS-b-PCL

PCL-b-PDMS-b-PCL复合环氧树脂的表面结构

Transmission Electron Microscopy Observations on Surface Nanocrystallization of Zircaloy-4

Zr-4合金表面变形纳米结构TEM研究

The effect of different surface processing of BLB implants on osseointegration

BLB种植体表面处理对骨结合的影响

Analyzing frequency selective surface with plane wave approach and the method of moments

平面波展开结合矩量法分析频率选择表面

Deposition and Adhesive Force of Diamond Films on Hard Alloy

金刚石薄膜在硬质合金表面的沉积与结合强度

Syntheses, Structures, and Surface Photoelectric Properties of Co-btec Complexes

Co-btec配合物的合成、结构及表面光电性能

The result concludes that the polishing solution is innocuous and harmless to the environment.

结果表明，经化学抛光后的铜及其合金表面光亮，达到镜面效果。

Agglomerates of delusterant particles located near the surface of sythetic fibers cause asperities.

消光剂颗粒集结在合成纤维表面附近，导致表面粗糙。

THE ADHESION AND THE FRACTURE ENERGY AT THE TNTERFACE OF COMPOSITES OF ARAM ID FIBER WITH ACTIVE SKIN LAYER

表面改性芳纶复合材料的界面粘结与界面断裂韧性

The Technology of Steel-Bonded Carbide Powder Being Explosive Compacted and Liquid Sintered on the Surface of Carbon Steel;

钢结硬质合金粉末在钢板表面爆炸成形及烧结复合

The combination of Al and oxygen decreases the absorption of oxygen on graphite surface.

铝与氧结合成渣降低了氧在石墨表面的吸附。

A STUDY ON THE SURFACE STRUCTURE OF POLYPYRROLE/ THIOKOL RUBBER IN-SITU COMPOSITE FILMS

聚吡咯/聚硫橡胶原位复合膜的表面结构研究

Study of Composite Layer with Si by Casting on Surface of Cast Steel;

耐热铸钢件表面铸渗结晶硅复合层技术的研究