Fire welding是什么意思

网络释义

用法例句

Diffusion of atoms during solid-state welding of surfaces laser quenched steel;

钢激光淬火后固态焊接过程中的原子扩散

Based on analysis of the probability for isothermal superplastic solid-state welding of different base metals of 40Cr and QCr0.

5异材实施恒温超塑性固态焊接可行性分析的基础上,探讨了恒温超塑性固态焊接的接头形成过程。

5 could be solid-state welding successfully in short time of 120～180s in the conditions of prepressure 56.

5 min,经120～180 s短时压接即可实现高质量的固态焊接。

In this study, advanced Laser surface treatment, Superplastic, Solid-joint technologies were used to the bond of a γ-TiAl alloy to realize the high quality bond of this alloy at low temperature and short time.

本文将先进的激光表面处理，超塑成形，扩散连接工艺结合在一起，实现γ-TiAl合金低温、短时、高质量的固态连接。

Investigation of Semi-Solid Welding of SiCp/6061Al Composites;

SiCp/6061Al复合材料半固态焊接研究

Microstructure of Soldering Joint of Rapidly Solidified Sn2.5Ag0.7Cu Solder Alloy

快速凝固态Sn2.5Ag0.7Cu钎料钎焊接头的显微组织

Microstructure and Solidification Mode of Welding Joint of Cr15Mn9Ni1N Stainless Steel

Cr15Mn9Ni1N不锈钢焊接接头的组织及凝固模式

EXPERIMENTAL STUDY ON THE STRENGTHENED COMPOSITE BEAM JOINTED WITH WELDED SHORT REBAR

焊接短筋连接的加固组合梁试验研究

Sweat Solder adapter with Cover Tube and Cast Set Screw Wall Flange

焊接焊料适配器含盖管和铸造固定螺栓墙法兰

horizontal fixed position

固定横向焊位置(指管子环形接头横向焊

Welding Quality Thermal Control System With Resistance Welder for Narrow Lap Welding

窄搭接电阻焊机的焊接质量热态控制系统

Three lead wires are soldered to the anchor terminals.

在固定接线端子上焊有三根导线。

New Technology of Solidoid Jointing Stir Friction Welding

固相连接新技术——搅拌摩擦焊技术

Research of the Fatigue Test of Welded Steel Structure Reinforced by CFRP;

CFRP加固焊接钢结构疲劳试验研究

FE Analysis of Welded Steel Beam Strengthened by CFRP

CFRP加固焊接工字钢梁的有限元分析

Study on Reinforcing Methods for Welded Tubular Joints Structures

焊接管节点结构的加固方法研究(英文)

Microstructural characteristic of rapid solidification welding joint of melt-spun Cu-Sn peritectic alloy foils

急冷Cu-Sn合金的快速凝固焊接接头组织特征

Welding residual stresses of cover-plate retrofitted steel moment connections

梁柱刚接节点盖板加固的焊接残余应力分析

Submerged arc welding procedures of large-scale intersection and modeling of welding gun gesture

大型相贯线埋弧焊接工艺研究及焊枪姿态建模

Preparation and welding performance of amorphous interlayer alloys for TLP bonding

TLP焊用非晶态中间层合金的制备及焊接性能

Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4

对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4

Cell connectors and terminal post burning must be done in such a manner that there is complete fusion of the post strap top and the cover lead bushing with the connector ring or terminal post.

连接条和接线柱的焊接必须使极柱顶部和盖子的铅衬套与连接条环口或接线柱完全熔焊牢固。