solid-state extrusion是什么意思

网络释义

用法例句

A novel solid-state extrusion methodology for recycling poly(ethylene terephthalate) (PET) was proposed.

提出一种全新的固相挤出加工方法,即在低温下用双螺杆挤出机挤出加工回收聚对苯二甲酸乙二醇酯(PET)。

The research development of r-PET modification technique was summarized from five aspects: increase viscidity modification,solid-state extrusion modification,simple mixing modification,reactive modification,and modification by adding compatibilizer.

从增黏改性、固相挤出法改性、共混改性、反应改性和增容改性等几个方面论述了聚对苯二甲酸乙二醇酯(PET)瓶回收料改性技术的研究进展。

This polymer alloy is prepared by low temperature solid-state extrusion and reactive extrusion.

简要介绍了该聚合物合金的加工过程,其主要工艺是通过低温固相挤出和反应挤出制备。

Highly oriented high density polyethylene (HDPE) samples were obtained by solid state extrusion under comparably low speed, with four dies and different draw ratio.

采用4个不同拉伸比的口模,在较低速度下对高密度聚乙烯(HDPE)成功地实现了固态挤出。

The technique of solid-state extrusion is employed for the deformation of ultra high molecular weight polyethylene.

用柱塞式挤出机进行超高分子量聚乙烯(UHMWPE)的固态挤出,所得制品光滑、透明、密度较大,拉伸强度超过110MPa,拉伸弹性模量高达85GPa。

New design method of countercurrent multi-effect evaporation system with solid separation;

有固相析出的逆流多效蒸发系统的新设计方法

The model and process simulation of multi-effect two stage evaporation system with solid separation;

有固相析出的多效两段蒸发系统模型与过程模拟

A mathematical model of cocurrent multi effect evaporation with solid separation was established.

建立了带有固相析出的并流多效蒸发系统的数学模型。

Research about Solid State Extrusion of Ultra-High Molecular Weight Polyethylene;

超高分子量聚乙烯的固态挤出成型研究

Study on the Properties and Morphological Structure of the Polyolefin Sheets Solid-State Extruded in Complex Stress Field;

复合应力场下聚烯烃的固态挤出及其形态结构和性能关系的研究

FE Simulation of 2017 Alloy during the Semi-Solid Backward Extrusion;

铝合金半固态反挤压过程的数值模拟

Study on Fluidity of ZL101 in Semi-solid Micro-Extrusion

ZL101铝合金半固态微挤压流动性研究

Semi-solid thixo-extrusion of AlSi7MgBe alloy

AlSi7MgBe合金的半固态挤压成形

Microstructure and Properties of ZL116 Alloy Parts Through Semi-solid Extrusion

半固态ZL116合金挤压成形与显微组织

Study on Forming Capability and Solidified Microstructures of Magnesium Alloy by Extrusion in the Semisolid;

镁合金半固态挤压成形性能及凝固组织研究

Effects of Extrusion Pressure on Internal Quality of Semi-solid Hypereutectic High Chromium Cast Iron Extrusion Parts

挤压力对过共晶高铬铸铁半固态挤压件内部质量的影响

A Empirical Analysis of the Crowd-in-or-crowd-out Effect of FDI to Fixed Assets Investment in Tianjin;

FDI对天津固定资产投资挤入挤出效应的实证分析

Process Parameters Design of Semisolid Squeeze Casting for Producing White Cast Iron Milling Ball

白口铸铁磨球半固态挤压铸造工艺参数设计

Study on Semi-solid Squeeze Casting Technique and Microstructure Property of Low Alloy Steel;

低合金钢半固态挤压铸造工艺及组织性能研究

Fabrication and Extrusion of Semi-solid Slurry of Hypoeutectic High Chromium Cast Iron;

亚共晶高铬铸铁半固态浆料制备及挤压成形

Fabrication and Extrusion of Semi-solid Slurry of Hypereutectic High Cr Cast Iron;

过共晶高铬铸铁半固态浆料制备及挤压成形

Die Cast Dies Design for Semi-solid Rheo-Extrusion Technique and Study on the Process Properties of Gear of Tachometer;

测速齿轮半固态挤压成型模具设计与工艺研究

Process and Theoretic Study on Semi-solid Extrusion for Aluminium Alloys

铝合金半固态挤压成形工艺及理论研究

Influence of Process Parameter on Spraying High Mn ZA35 Alloy

固态挤压对喷射沉积高锰ZA35合金的影响

Numerical Simulation of Semi-solid Extrusion for Spur Gear

直齿圆柱齿轮半固态挤压成形的数值模拟研究

Preparation of Mg-Al Series Magnesium Alloy Semi-solid Billets and its Thixo-extrusion Forming

Mg-Al系镁合金半固态坯料制备及触变挤压研究