Aimed at some problems of YOT51 and R17K hydraulic couplers occurred frequently in operation, for example, blocking of scoop tubes, fusion of fusible plugs, burning of bearings, lost of the working oil pressure, and vibration of hydraulic couplers, the paper analyzes causes of these faults, and puts forward some improvement methods.
对17K1-E和YOT51型液力偶合器在实际运行过程中经常出现的勺管卡涩、易熔塞熔化、轴承烧损、工作油压消失以及偶合器振动等故障进行了原因分析,并提出改进措施。
Caution must be exercised because the heat from a small flame can melt the fuse plugs and cause a rapid discharge of acetylene which can produce a large fire.
小火散发出来的热量可能使易熔塞熔化,导致乙炔的迅速泄漏,从而引起大火,因此必须十分小心。
Fusible plug for gas cylinders
GB8337-1996气瓶用易熔合金塞
A eutectic mixture, solution, or alloy.
低共熔混合物,易熔质易熔的混合物,溶体或合金
Capable of being fused or melted by heating.
易熔的,可熔化的通过加热能被融化或熔化的
All of the three above groups can be obtained in either fusible or non-fusible form.
上述三种衬布既有易熔的,也有不熔的。
Argo-Bond alloy
阿戈-邦德易熔合金
Lichtenberg metal
里希腾伯格易熔合金
Newton alloy
一种铋铅锡易熔合金
Mellotte's alloy
梅洛特铋锡铅易熔合金
Lichtenberg alloy
李顿勃铅锡铋易熔合金
fusible alloy-type fixed temperature detector
易熔合金定温探测器
fusible-element-type fixed temperature detector
易熔合金温度探测器
This stuff melts very easily.
这种材料很容易熔化。
The tungsten does not easily melt or break.
钨丝不容易熔化或折断。
Solid Melting Section on the Ram Extruder Based on ANSYS
基于ANSYS的柱塞挤出机熔融段研究
The melting sticking occurred when the melting point of materials is lower than the drying temperature.
物料熔点低于干燥温度时容易产生热熔性粘壁。
To separate(the metals in an alloy)by melting the more fusible constituents while leaving the less fusible ones solid.
熔析通过熔解易熔成份,而使难熔成份保持固体状分离(合金中的金属成分)
It is very fast and it will not get into a traffic jam.
它很快并且不容易塞车。
CopyRight © 2020-2024 优校网[www.youxiaow.com]版权所有 All Rights Reserved. ICP备案号:浙ICP备2024058711号